Loctite thread locking agent

Product Performance Table

Uses:

222 liquid thread locking agent
For most metal surfaces, demolition of common tools available. 222 plastic screws
For the M2-M12 thread locking and sealing (screw lock plastic).
Applied to the diameter of not more than 1 / 4 of the best fasteners, has some lubricity for accurate clamp loads.
242 thread locking agent
Can type, thixotropic viscosity.
M6-M20 for the locking and sealing.
White demolition work tools available, has some lubricity for accurate clamp loads.
243 thread locking agent
Fast curing, can be used for inert surface, good oil content. 243 thread locking adhesive
Easy to disassemble, minor oil pollution in the work surface to use. Pre-coated with Loctite Dri-Loc bolts agent apart and reload locking.
M20 the following thread for locking and sealing. Blue Oil
262 thread locking agent
For most metal surfaces. Thixotropic viscosity, chemical resistance.
(Red plastic) for the M20 the following thread locking and sealing.
Is a permanent locking of the thread locking agent, and in extreme chemical / environmental conditions are excellent anti-rust and corrosion.
271 thread locking agent
Low viscosity.
M36 thread for the following permanent locking and sealing.
272 thread locking agent
High temperature up to 230
Double threaded for locking the cylinder head. High-temperature plastic screws
Fast curing, including the absence of special treatment the surface of the fastener. Recommended for diameters 1.5 below bolt.
Open the heating and the use of tools is required.
277 thread locking agent
High viscosity. Excellent chemical resistance. 277 plastic screws
M36 thread for the following permanent locking and sealing plastic screws.
Thread prevent rust and corrosion, heat, and use tools and removable.
290 thread locking agent
In strength, low viscosity, fast curing. 290 plastic screws
Has been assembled for the M2-M12 thread locking and sealing. Can also be used to seal welds, castings trachoma (0.254mm below) micropores.
Green oil to prevent rust and corrosion thread, open the local heating is required and the use of tools.
248 in the strength thread locking Glue stick
The strength thread locking can be avoided due to vibration, shock and thermal expansion due to loose.
More reliable than conventional mechanical fasteners, and more economical.
Seal and protect the threads while preventing corrosion.
Hand tools can be demolished.
Temperature up to 150 degrees
Loose Torque :13-27N. M
High-strength thread 268 fixed Glue stick
High-strength thread locking can be avoided due to vibration, shock and thermal expansion due to loose.
Seal and protect the threads while preventing corrosion.
Local heating and the use of hand tools can be demolished.
Temperature up to 150 degrees
Loose Torque :25-50N. M