603 Retaining cylindrical plastic parts
Press fit ,Oil capacity ◆High strength ,Sealing and retaining cylindrical parts. ◆Radial fill the gap for the 0.13mm. ◆Solid in 10 minutes early, to prevent fretting corrosion and metal with parts. |
609 Retaining cylindrical plastic parts .
Press fit ,Low viscosity ◆High strength ,For rigid metal parts. ◆Radial fill the gap for the 0.13mm. ◆Easily with different metal parts. |
|
|
620 Retaining cylindrical plastic parts
Slide with ,High temperature ◆High viscosity ,High strength ,Not flowing. ◆Retention gap 0.3mm in diameter ◆High temperature To 230 ℃ 。 ◆To prevent fretting and corrosion of metal. |
638 Retaining cylindrical plastic parts
Slide with ,High strength ◆Fast curing 。 ◆Used to dynamically load or periodic conditions, with the gap may be retaining the shaft and hole up to 0.25mm. |
|
|
641 Retaining cylindrical plastic parts
Press fit /Slide with ,Easy to disassemble ◆With pieces of solid support for the cylindrical, especially for the occasion require frequent removal. |
648Retaining cylindrical plastic parts
Press fit ,High strength ,Fast curing ◆Temperature up to 175 ℃. ◆Fill the gap 0.15mm. Cured within 5 minutes early. ◆Can be used for transmission gears, motor rotor installation. |
|
|
660 Retaining cylindrical plastic parts
Press Fit Repair ◆Fast curing ,High strength ,High viscosity 。 ◆Fixed axis, end caps, keys, keyways, bearings, bushings. ◆Radial fill gap 0.5mm. |
680 Retaining cylindrical plastic parts
Slide with ,High strength ◆Retaining sleeve, pulleys, gears, rotor. Repair holes and shafts with the parts, tolerance parts. ◆Radial clearance is filled with 0.25mm, the early cure in 10 minutes. |
Parameters of cylindrical plastic parts Gute
| No |
Pack |
Color |
|
Shear strength (mpa.s) |
Gaps fill (mm) |
Temperature range (℃) |
Curing speed (initial solid min / full solid h) |
|
603 |
50ml/250ml |
Green |
125 |
>20 |
0.13 |
-50-150 |
20min/24h |
|
609 |
50ml/250ml |
Green |
125 |
>18 |
0.13 |
-50-150 |
10min/24h |
|
620 |
50ml/250ml |
Green |
8500 |
>20 |
0.30 |
-50-230 |
20min/24h |
|
638 |
50ml/250ml |
Green |
2500 |
>26 |
0.26 |
-50-150 |
5min/24h |
|
641 |
50ml/250ml |
Yellow |
600 |
>12 |
0.25 |
-50-150 |
20min/24h |
|
648 |
50ml/250ml |
Green |
500 |
>26 |
0.15 |
-50-175 |
5min/24h |
|
660 |
50ml/250ml |
Silver |
Paste |
>18 |
0.50 |
-50-150 |
10min/24h |
|
680 |
50ml/250ml |
Green |
1250 |
>22 |
0.25 |
-50-150 |
10min/24h |
Features: MeiTaibang cylindrical liquid retaining compound is a single fixed sealant from curing. For circular parts assembly fixed to eliminate the activities between the key and keyway gap has a positive effect on the cylinder seal, and ease of use advantages. Typical applications: widely used cylindrical locking and sealing, bearings, bushings, keyways, casing, pulley, gears, rotors and other accessories for industrial use round plastic. Note: First, beware of splashing into the eyes when used on the skin, if the case of contact, flush immediately with water, and hospital treatment. Second, attention to ventilation when using. Third, the storage easy reach of children. Fourth, stored in a cool dry place, (10 ℃ -25 ℃). V, storage period: one year
|